Waters Network Systems MS1008-GLXSC Spécifications télécharger pdf (Page 14)

Waters Network Systems User’s Manual Page 14

PSX/MS1008 Models with Gigabit Uplink

3.6 Desktop Installation

Choose a surface for your switch that is clean, smooth, level, sturdy and with a power

outlet nearby. Make sure there is enough clearance around the switch to allow

attachment of cables, power cord and air circulation.

3.61 Attaching Rubber Feet

1. Make sure mounting surface on the bottom of the switch is free of grease and dust.

2. Remove adhesive backing from the rubber feet.

3. Apply the rubber feet to each corner on the bottom of the switch.

Figure 3-8. Attaching Rubber Feet to each corner on the bottom of the switch

3.62 Power On

Connect the power cord to the AC power socket on the rear panel of the switch. Check

the power indicator on the front panel to see if power is properly supplied.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 58 59

Pas de commentaire

Waters Network Systems MS1008-GLXSC Spécifications Page 14